Return Homebanner Division of Commercial Grinding Services,Inc.
2927 Nationwide Parkway, Brunswick, OH 44212
330-273-5040 | 800-379-1433
FAX: 330-273-5340
Mail: P.O. Box 1121, Medina, OH 44258
  

SERIES 722 —
2 Flute, 30 Degree Helix, Ball End
Long Length End Mills
EDP# DIA SHANK LOC OAL
722-1250 1/8 1/8 3/4 2-1/4
722-1875 3/16 3/16 3/4 2-1/2
722-2500 1/4 1/4 1-1/8 3
722-3125 5/16 5/16 1-3/8 3
722-3750 3/8 3/8 1-1/2 3
722-4375 7/16 7/16 2 4
722-5000 1/2 1/2 2 4
722-6250 5/8 5/8 2-1/4 5
722-7500 3/4 3/4 2-1/4 5
722-1000 1 1 2-1/4 5


— TOLERANCES —

CUTTING DIAMETER:
+.000 / -.002
SHANK DIAMETER:
+.000 / -.0005

Suited for deep Slotting or Peripheral Milling
applications where a
Ball End Geometry is required
For ALTiN Coated End Mills Add the following
after the EDP#
UC = Uncoated
ALTiN = ALTiN Coated

For Example:
*140-5000-ALTiN  
(ALTiN Coated)
*143-5000-UC
(UNCOATED)

 


  

Products: High Performance | End Mills | Drills | Reamers

Industries: Mold & Die | Automotive | Aerospace | Power Generation | Castings & Foundries

© 2010 CGS All rights reserved.