|
|
 |
| TOOL COATING OVERVIEW — |
TiN
(Titanium Nitride)
"Gold"
Widely used general pupose tool coating used in most cutting operations. Medium heat resistance and good lubricity. Reduces wear and improves chip formation for extended tool life. Good adhesion and low friction.
— Maximum Working Temperature —
Approximately 1110 F |
|
TiCN
(Titanium Carbonitride)
"Violet-Brown"
This coating is recommended for non-ferrous materials like Aluminum, Brass and Bronze. Has low heat resistance and good lubricity, hardness and smoothness.
— Maximum Working Temperature —
Approximately 750 F |
|
ALTiN
(Aluminum Titanium Nitride)
"Dark-Grey - Black"
Multi-layer coating has excellent thermal staqbility, excels in high speed dry machining as well as wet machining. Excellent heat resistance surpassing all conventional coatings when machining Cast Iron and Hardened Steel.
— Maximum Working Temperature —
Approximately 1470 F
|
 |
ZrN
(Zirconium Nitride)
"Pale Yellow"
Typically used on Non-Ferrous materials like Aluminum, Brass, Nickel Alloys, etc. but can also handle some applications for certain Iron and Stainless grades.
— Maximum Working Temperature —
Approximately 1110 F
|
 |
CGS stocks a majority of our items in ALTiN coating, however
all coatings may be ordered on request. Please follow the example below to order
a coated version of any of our items.
* Additional lead times may apply to coated items not in stock*
|
ADD THE FOLLOWING AFTER EDP #’S
|
UC |
|
=
UNCOATED |
ALTiN |
|
= ALTiN COATED |
TiN |
|
=
TiN COATED |
TiCN |
|
=
TiCN COATED |
ZrN |
|
=
ZrN COATED |
|
| Example: |
CR123-5000.060-ALTiN |
(ALTiN COATED) |
| |
CR123-5000.060-UC |
(UNCOATED) |
|
|
|
|
