Outlet Store

Outlet Store

 

 outlet1a.jpg

 

**Items listed under the "Outlet" category may meet some of the following listed below.**
                                    • Limited quantities! Special pricing only available on inventory in stock
                                    • Discontinued part or tool style
                                    • Excessive Inventory Stock levels
                                    • Above standard T.I.R run out
                                    • Dimensional tolerances above or below standard allowed limits
                                    • Minor chipping
                                    • Uneven surface coatings
                                    • Packaging tubes may vary
  • 140-1250E

    E series

    140-1250E

    $7.12
    4Flutes 30 DEG SQ END MILL 1/8"DIA 1/2"LOC 1-1/2"OAL "140E-SERIES" DIA=1/8 - SHANK=1/8 - LOC=1/2 - OAL=1-1/2 - FLUTES=4 Flute - END STYLE=Square End - COATING=UNCOATED - Radius=No-Solid Carbide End Mills | 140 Series | 4 Flute | Square end | General...
    $7.12
  • 140-1250E - Altin

    E series

    140-1250E - Altin

    $9.52
    4FL 30 DEG SQ END MILL 1/8"DIA 1/2"LOC 1-1/2"OAL W/ALTiN   DIA=1/8 - SHANK=1/8 - LOC=1/2 - OAL=1-1/2 - FLUTES=4 Flute - END STYLE=Square End - COATING=ALTiN - Radius=No-Solid Carbide End Mills | 140 Series | 4 Flute | Square end | General Purpose |...
    $9.52
  • 140-1875E

    E series

    140-1875E

    $9.80
    4FL 30 DEG SQ END MILL 3/16"DIA 5/8"LOC 2"OAL  DIA=3/16 - SHANK=3/16 - LOC=5/8 - OAL=2 - FLUTES=4 Flute - END STYLE=Square End - COATING=UNCOATED - Radius=No-Solid Carbide End Mills | 140 Series | 4 Flute | Square end | General Purpose |...
    $9.80
  • 140-1875E-ALTiN

    E series

    140-1875E-ALTiN

    $12.87
    4FL 30 DEG SQ END MILL 3/16"DIA 5/8"LOC 2"OAL w/ALTiN Coating DIA=3/16 - SHANK=3/16 - LOC=5/8 - OAL=2 - FLUTES=4 Flute - END STYLE=Square End - COATING=ALTiN - Radius=No-Solid Carbide End Mills | 140 Series | 4 Flute | Square end | General Purpose |...
    $12.87
  • 140-2500E

    E series

    140-2500E

    $13.27
    4FL 30 DEG SQ END MILL 1/4"DIA 3/4"LOC 2-1/2"OAL" DIA=1/4 - SHANK=1/4 - LOC=3/4 - OAL=2-1/2 - FLUTES=4 Flute - END STYLE=Square End - COATING=UNCOATED - Radius=No-Solid Carbide End Mills | 140 Series | 4 Flute | Square end | General Purpose |...
    $13.27
  • 140-2500E-ALTiN

    E series

    140-2500E-ALTiN

    $19.57
    4FL 30 DEG SQ END MILL 1/4"DIA 3/4"LOC 2-1/2"OAL W/ALTiN DIA=1/4 - SHANK=1/4 - LOC=3/4 - OAL=2-1/2 - FLUTES=4 Flute - END STYLE=Square End - COATING=ALTiN - Radius=No-Solid Carbide End Mills | 140 Series | 4 Flute | Square end | General Purpose |...
    $19.57
  • 140-3750E

    E series

    140-3750E

    $20.66
    4FL 30 DEG SQ END MILL 3/8"DIA 1"LOC 2-1/2"OAL   DIA=3/8 - SHANK=3/8 - LOC=1 - OAL=2-1/2 - FLUTES=4 Flute - END STYLE=Square End - COATING=UNCOATED - Radius=No-Solid Carbide End Mills | 140 Series | 4 Flute | Square end | General Purpose |...
    $20.66
  • 140-3750E-ALTiN

    E series

    140-3750E-ALTiN

    $30.02
    4FL 30 DEG SQ END MILL 1/4"DIA 3/4"LOC 2-1/2"OAL W/ALTiN DIA=3/8 - SHANK=3/8 - LOC=1 - OAL=2-1/2 - FLUTES=4 Flute - END STYLE=Square End - COATING=ALTiN - Radius=No-Solid Carbide End Mills | 140 Series | 4 Flute | Square end | General Purpose |...
    $30.02
  • 140-5000E

    E series

    140-5000E

    $31.75
    4FL 30 DEG SQ END MILL 1/2"DIA 1"LOC 3"OAL "   DIA=1/2 - SHANK=1/2 - LOC=1 - OAL=3 - FLUTES=4 Flute - END STYLE=Square End - COATING=UNCOATED - Radius=No-Solid Carbide End Mills | 140 Series | 4 Flute | Square end | General Purpose | Manufactured on...
    $31.75
  • 140-5000E-ALTiN

    E series

    140-5000E-ALTiN

    $43.35
    4FL 30 DEG SQ END MILL 1/2"DIA 1"LOC 3"OAL w/ALTiN Coating   DIA=1/2 - SHANK=1/2 - LOC=1 - OAL=3 - FLUTES=4 Flute - END STYLE=Square End - COATING=ALTiN - Radius=No-Solid Carbide End Mills | 140 Series | 4 Flute | Square end | General Purpose |...
    $43.35
  • 442-3750

    CGS General Purpose

    442-3750

    $42.60
    DIA=3/8 - SHANK=3/8 - LOC= 5/8 - OAL=2-1/2 - FLUTES=4 Flute - END STYLE=Ball End - COATING=UNCOATED - Radius=.1875 -Solid Carbide End Mills | 442 Series | 4 Flute | Ball end | General Purpose | Manufactured on precision CNC equipment and made to the...
    $42.60
  • R140-4850

    Refurbished

    R140-4850

    $9.19
    REFURBISHED Carbide End Mills!   100% CNC REGRIND    4FL SQUARE END    .485" DIAMETER    1/2" Shank   2.5" - 2.9" OAL    30 DEGREE  HELIX    Approx 5/8" to 1" LENGTH OF...
    $9.19
Google Analytics Alternative