Ferocious | High Performance End Mill

Ferocious | High Performance End Mill

Ferocious 2000 | High Performance Carbide End Mill

  • 2 Flute | Square End | 55° Helix
  • Single End | UnCoated & AlTiN-Coated
  • Standard, Stub, Long Reach, Long and Xtra Long Lengths
  • High Performance in roughing, slotting, peripheral and finish milling
  • This High Performance tool yields the highest chip load & feed-rates per tooth in the industry & allows you to remove more material than ever before.
  • Applications: Aluminum, Copper, Brass, Non-Ferrous, Plastics, Composites 

 

  • 2000

    2000

    Ferocious 2000 Series

    $21.15
    9/64" Dia, 3/16" Shank, 5/8" Length of Cut, 2" Overall Length, 2-Flute, 55° Helix, Square End, Single End, Uncoated
    $21.15
  • CGS Ferocious 2 Flute 55° High Helix high performance end mill for milling aluminum- H 2000-S

    2000-S

    Ferocious 2000 Series

    $23.87
    9/64" Dia, 3/16" Shank, 5/8" Length of Cut, 2" Overall Length, 2-Flute, 55° Helix, Square End, Single End, Zirconium Nitride Coating
    $23.87
  • 2001

    2001

    Ferocious 2000 Series

    $22.08
    1/8" Dia, 1/8" Shank, 1/2" Length of Cut, 1-1/2" Overall Length, 2-Flute, 55° Helix, Square End, Single End, Uncoated
    $22.08
  • CGS Ferocious 2 Flute 55° High Helix high performance end mill for milling aluminum- H 2001-S

    2001-S

    Ferocious 2000 Series

    $24.86
    1/8" Dia, 1/8" Shank, 1/2" Length of Cut, 1-1/2" Overall Length, 2-Flute, 55° Helix, Square End, Single End, Zirconium Nitride Coated
    $24.86
  • 2002-S

    2002-S

    Ferocious 2000 Series

    $28.42
    5/32" Dia, 5/32" Shank, 3/4" Length of Cut, 2" Overall Length, 2-Flute, 55° Helix, Sqaure End, Single End, Zirconium Nitride
    $28.42
  • 2003

    2003

    Ferocious 2000 Series

    $23.13
    3/16" Dia, 3/16" Shank, 5/8" Length of Cut, 2" Overall Length, 2-Flute, 55° Helix, Square End, Single End, Uncoated
    $23.13
  • 2003-S

    2003-S

    Ferocious 2000 Series

    $25.86
    3/16" Dia, 3/16" Shank, 5/8" Length of Cut, 2' Overall Length, ­55° Helix, Square End, Single End, Zirconium Nitride Coated
    $25.86
  • 2004

    2004

    Ferocious 2000 Series

    $26.11
    3/16" Dia, 3/16" Shank, 1" Length of Cut, 3" Overall Length, 2-Flute, 55° Flute, Square End, Single End, Uncoated
    $26.11
  • CGS Ferocious 2 Flute 55° High Helix high performance end mill for milling aluminum- H 2004-S

    2004-S

    Ferocious 2000 Series

    $30.87
    3/16" Dia, 3/16" Shank, 1" Length of Cut, 3" Overall Length, 2-Flute, 55° Helix, Square End, Single End, Zirconium Nitride Coated
    $30.87
  • 2006

    2006

    Ferocious 2000 Series

    $26.11
    1/4" Dia, 1/4" Shank, 3/4" Length of Cut, 2-1/2" Length of Cut, 2-Flute, 55° Helix, Square End, Single End, Uncoated
    $26.11
  • 2006-S

    2006-S

    Ferocious 2000 Series

    $30.87
    1/4" Dia, 1/4" Shank, 3/4" Length of Cut, 2-1/2" Overall Length, 2-Flute, 55° Helix, Square End, Single End, Zirconium Nitride Coated
    $30.87