Refurbished End Mills

Regrinds: R1018 - 4 Flute Carbide ROUGHER Regrind Square End Mill: .4850" dia x 1/2" Shank x APPROX 3/4"- 1" LOC x 2-3/4" OAL x 30° Degree Helix- w/CHIPBREAKERS - CUT OFF AND REWORKED COMPLETE. TOOLS MAY BE PARTIAL ALTiN COATED.

REFURBISHED Carbide End Mills!   100% CNC REGRIND    4FL SQUARE END    .485" DIAMETER    1/2" Shank   2.5" - 2.9" OAL    30 DEGREE  HELIX    Approx 5/8" to 1" LENGTH OF...

4 FLUTE - .485" DIAMETER - 30° HELIX - SQUARE END - REFURBISHED END MILLS  CUT OFF AND REWORKED END TO STUB LENGTH. TOOLS MAY BE PARTIAL ALTiN COATED ON OD AND FLUTES ENDS WILL BE UNCOATED. 100% CNC REGRIND  .485" 4FL SQUARE END REFURBISHED...

4 FLUTE - 1/2" DIAMETER - 30° HELIX - SQUARE END - REFURBISHED END MILLS  CUT OFF AND REWORKED END TO STUB LENGTH. TOOLS MAY BE PARTIAL ALTiN COATED ON OD AND FLUTES ENDS WILL BE UNCOATED. 100% CNC REGRIND   1/2" 4FL SQUARE END...

4 FLUTE - 1/2" DIAMETER - 30° HELIX - .030 CORNER RADIUS - REFURBISHED END MILLS  CUT OFF AND REWORKED END TO STUB LENGTH. TOOLS MAY BE PARTIAL ALTiN COATED ON OD AND FLUTES ENDS WILL BE UNCOATED. 100% CNC REGRIND    1/2" 4FL .030...

4 FLUTE - 1/2" DIAMETER - 30° HELIX - .060 CORNER RADIUS - REFURBISHED END MILLS  CUT OFF AND REWORKED END TO STUB LENGTH. TOOLS MAY BE PARTIAL ALTiN COATED ON OD AND FLUTES ENDS WILL BE UNCOATED. 100% CNC REGRIND   1/2" 4FL .060...

Regrinds: RCR883-1500.060 - 8 Flute Carbide Stub Regrind end mill: 1.490-1.260" dia x 1" Shank x APPROX 1-3/4"- 2" LOC x 4"- 4-1/4" OAL -  REWORKED COMPLETE TO LOWER  DIA/SHORTER LOC - TOOLS MAY BE PARTIAL ALTiN COATED.