Refurbished (Regrind) End Mills

Regrinds: Reliable Performance at Reduced Cost

CGS Tool regrinds are professionally sharpened and inspected to extend tool life and performance. With our regrinding expertise, you get a tool that cuts like new—at a fraction of the cost of buying brand-new tooling.

  • Cost Savings – Lower tooling costs while maintaining dependable cutting performance.
  • Sustainable Solution – Reduce waste by extending the lifespan of solid carbide tools.
  • Precision Guarantee – Reground under strict standards for accuracy and reliability.
  • R1018 - 4 Flute Carbide ROUGHER Regrind Square End Mill: .4850" DIA x 1/2" SHANK x APPROX 3/4"- 1" LOC x 2-3/4" OAL x 30° Degree Helix w/CHIPBREAKERS CUT OFF AND REWORKED COMPLETE. TOOLS MAY BE PARTIAL ALTiN COATED.

    R1018

    Regrinds: R1018 - 4 Flute Carbide ROUGHER Regrind Square End Mill: .4850" dia x 1/2" Shank x APPROX 3/4"- 1" LOC x 2-3/4" OAL x 30° Degree Helix- w/CHIPBREAKERS - CUT OFF AND REWORKED COMPLETE. TOOLS MAY BE PARTIAL ALTiN COATED.

    $8.24
    Add to Cart
  • R140-4850: 4 Flute Carbide Regrind end mill: .4850" DIA x 1/2" SHANK x APPROX 3/4" - 1" LOC x 2-3/4" OAL CUT OFF AND REWORKED COMPLETE. TOOLS MAY BE PARTIAL ALTiN COATED.

    Refurbished End Mills

    R140-4850

    REFURBISHED Carbide End Mills!   100% CNC REGRIND    4FL SQUARE END    .485" DIAMETER    1/2" Shank   2.5" - 2.9" OAL    30 DEGREE  HELIX    Approx 5/8" to 1" LENGTH OF...

    $10.94
    Add to Cart
  • R240-4850 - 4 Flute Carbide Stub Regrind end mill: .4850" DIA x 1/2" SHANK x APPROX 1/2-5/8" LOC x 2-1/2" OAL CUT OFF AND REWORKED COMPLETE. TOOLS MAY BE PARTIAL ALTiN COATED.

    Refurbished End Mills

    R240-4850

    4 FLUTE - .485" DIAMETER - 30° HELIX - SQUARE END - REFURBISHED END MILLS  CUT OFF AND REWORKED END TO STUB LENGTH. TOOLS MAY BE PARTIAL ALTiN COATED ON OD AND FLUTES ENDS WILL BE UNCOATED. 100% CNC REGRIND  .485" 4FL SQUARE END REFURBISHED...

    $10.94
    Add to Cart
  • R240-5000EO - 4 Flute Carbide Stub Regrind end mill 1/2" DIA x 1/2" SHANK x 1/4" to 3/8" LOC x 2" to 2-5/8" OAL CUT OFF AND REWORKED END TO STUB LENGTH. TOOLS MAY BE PARTIAL ALTiN COATED ON OD AND FLUTES ENDS WILL BE UNCOATED

    Refurbished End Mills

    R240-5000EO

    4 FLUTE - 1/2" DIAMETER - 30° HELIX - SQUARE END - REFURBISHED END MILLS  CUT OFF AND REWORKED END TO STUB LENGTH. TOOLS MAY BE PARTIAL ALTiN COATED ON OD AND FLUTES ENDS WILL BE UNCOATED. 100% CNC REGRIND   1/2" 4FL SQUARE END...

    $10.94
    Add to Cart
  • R243-5000.030EO

    Refurbished End Mills

    R243-5000.030EO

    4 FLUTE - 1/2" DIAMETER - 30° HELIX - .030 CORNER RADIUS - REFURBISHED END MILLS  CUT OFF AND REWORKED END TO STUB LENGTH. TOOLS MAY BE PARTIAL ALTiN COATED ON OD AND FLUTES ENDS WILL BE UNCOATED. 100% CNC REGRIND    1/2" 4FL .030...

    $10.94
    Add to Cart
  • Regrinds: R243-5000.060EO - 4 Flute Carbide Stub Regrind RADIUS End Mill: 1/2" dia x 1/2" Shank x 1/4" to 3/8" LOC x 2" to 2-5/8" OAL w/.060" CORNER RADIUS - CUT OFF AND REWORKED END TO STUB LENGTH. TOOLS MAY BE PARTIAL ALTiN COATED ON OD AND FLUTES EN...

    Refurbished End Mills

    R243-5000.060EO

    4 FLUTE - 1/2" DIAMETER - 30° HELIX - .060 CORNER RADIUS - REFURBISHED END MILLS  CUT OFF AND REWORKED END TO STUB LENGTH. TOOLS MAY BE PARTIAL ALTiN COATED ON OD AND FLUTES ENDS WILL BE UNCOATED. 100% CNC REGRIND   1/2" 4FL .060...

    $10.94
    Add to Cart
  • RCR883-1500.060

    RCR883-1500.060

    Regrinds: RCR883-1500.060 - 8 Flute Carbide Stub Regrind end mill: 1.490-1.260" dia x 1" Shank x APPROX 1-3/4"- 2" LOC x 4"- 4-1/4" OAL -  REWORKED COMPLETE TO LOWER  DIA/SHORTER LOC - TOOLS MAY BE PARTIAL ALTiN COATED.

    $51.50
    Add to Cart
Compare Selected