Product Overview
DIA=3/8 - SHANK=3/8 - LOC=1 - OAL=3 - FLUTES=4 Flute - END STYLE=Square End - COATING=ALTiN - Radius=No-Solid Carbide End Mills | HV140 Series | 4 Flute | Square end | HV HI-VELOCITY | Variable helix and off set indexes reduce chatter and harmonics to improve surface finishes, feed rates and tool life. There is NO Equal to the industry's BEST variable helix end mill | Variable Helix | Single End >>> Applications: Steels, Stainless, Cast Iron, Titanium, Alloys, Inconel, Select Non-Ferrous Materials
Product Overview:
CGS Tool HV140-3753. 3/8" diameter, 4-flute, solid carbide Square End mill. Steels and alloys. Hi-Velocity (HV) Series. Roughing or finishing - handles both. Micro-grain carbide. Variable helix and variable index geometry. Chatter and harmonics stay low,ALTiN coating Heat managed at high RPM. Chip evacuation clean. Surface finishes consistent. Feeds and speeds run higher. Accuracy holds.
Tool Specifications:
Diameter: 3/8"
Shank: 3/8"
Length of Cut (LOC): 1"
Overall Length (OAL): 3"
Flutes: 4 – Square End
Material: Solid Micro-Grain Carbide
Coating: ALTiN (Aluminum Titanium Nitride)
Series: CGS Hi-Velocity (HV)
Part No: HV140-3753
Key Performance Features:
- Variable Helix & Index - chatter down, harmonics reduced, feed rates and tool life up.
- ALTiN coating - holds against oxidation at high temperatures.
- Cuts steels, stainless steels, cast iron, titanium, alloys, Inconel, and select non-ferrous materials.
- Slotting, profiling, finishing operations.
- Reduced neck & Weldon flats available upon request.
