HV140-3751

DIA=3/8 - SHANK=3/8 - LOC=1 - OAL=4 - FLUTES=4 Flute - END STYLE=Square End - COATING=ALTiN - Radius=No-Solid Carbide End Mills | HV140 Series | 4 Flute | Square end | HV HI-VELOCITY | Variable helix and off set indexes reduce chatter and harmonics to improve surface finishes, feed rates and tool life. There is NO Equal to the industry's BEST variable helix end mill | Variable Helix | Single End >>> Applications: Steels, Stainless, Cast Iron, Titanium, Alloys, Inconel, Select Non-Ferrous Materials

HV140-3751 | 3/8" 4-Flute Square End Mill | Hi-Velocity Series
The HV140-3751 from CGS Tool is a 3/8" solid carbide end mill, 4-flute, square end profile. Built for steel, stainless, and hardened alloy work , roughing and finishing both.
Micro-grain carbide stock is used throughout. The flutes carry a variable helix and variable index grind, which breaks up harmonic vibration and keeps the cut stable at high RPM. ALTiN coating goes on top of that , it handles oxidation and thermal buildup well, so the edge holds longer on harder materials.
At 1" LOC and 4" OAL, the tool covers slotting, profiling, and finishing without a swap. Chip flow stays clean through the geometry.

Tool Specifications:
Diameter: 3/8"
Shank: 3/8"
(LOC) Length of Cut: 1"
(OAL) Overall Length: 4"
Flutes: 4 – Square End
Material: Solid Micro-Grain Carbide
Coating: ALTiN (Aluminum Titanium Nitride)
Series: CGS Hi-Velocity (HV)
Part No: HV140-3751

Key Performance Features:

• Variable helix and variable index grind , cuts vibration, stabilizes tool path.
• ALTiN coating , oxidation and heat resistant at high spindle speeds.
• Rated for steels, stainless steels, hardened materials.
• Slotting, profiling, finishing , single tool.
• Reduced neck and Weldon flats available on request.