Product Overview
DIA=1 - SHANK=1 - LOC=1-1/2 - OAL=4 - FLUTES=4 Flute - END STYLE=Corner Radius - COATING=ALTiN - Radius=.030 -Solid Carbide End Mills | HV143 Series | 4 Flute | Radius end | HV HI-VELOCITY | Variable helix and off set indexes reduce chatter and harmonics to improve surface finishes, feed rates and tool life. There is NO Equal to the industry's BEST variable helix end mill | Variable Helix | Single End >>> Applications: Steels, Stainless, Cast Iron, Titanium, Alloys, Inconel, Select Non-Ferrous Materials
Product Overview — HV143-1000.030
HV143-1000.030 | Hi-Velocity "HV" Series | 4 Flute | Corner Radius | Solid Carbide | ALTiN Coating
1" diameter, solid micro-grain carbide Corner Radius End Mill from the CGS Hi-Velocity (HV) Series. Variable helix with offset index geometry — cuts chatter and harmonics at the source, with measurable gains in feed rate, surface finish, and tool life. No equal in the industry for variable helix performance.
Rated for steels, stainless, cast iron, titanium, Inconel, and select non-ferrous materials. Single end. Roughing and finishing are capable.
Specifications:
Diameter: 1"
Shank: 1"
LOC: 1-1/2"OAL4"
Flutes: 4 – Corner Radius Material Solid Micro-Grain Carbide
Coating: ALTiN (Aluminum Titanium Nitride)
Series: CGS Hi-Velocity (HV)
Part No: HV143-1000.030
Key Performance Features:
- Variable helix/offset index — reduces chatter and harmonics.
- ALTiN coating — oxidation and heat resistance at elevated RPM.
- Chip evacuation and surface finish improvement by geometry design.
- Reduced neck and Weldon flats available upon request.
